Creative Dxr2 Manual De Usuario

English

2.

Disconnect the monitor from the VGA card and reconnect it to the bottom connector on the Dxr2 
decoder card.  Connect the VGA card and the Dxr2 decoder card using the VGA loopback cable 
provided.

To play DVDs on your television monitor, use the TV Out cable to connect the television to the 
Dxr2 decoder card’s TV Out connector.
To play digital sound from a DVD or CD, connect a Dolby Digital receiver or amplifier to the 
Dxr2 decoder card using a high-quality RCA cable.

3.

Replace the computer cover and reconnect the power cord. 

VGA 
monitor

VGA 
Loopback 
cable

VGA 
card

To Dolby Digital (AC-3) 
audio decoder device

To TV set

TV Out cable

Dolby Digital (AC-3) S/PDIF 
cable (not included)

Dxr2 decoder card

Note:  Refer to Figure  on page 3 for details on the 
location of the Dxr2 decoder card’s jacks and connectors.

S-Video

Composite video out

A Sound Blaster compatible 
audio card is required for 
connecting to the Dxr2 decoder 
card.  To obtain the high-quality 
sound reproduction available 
with Dolby Digital, use a Sound 
Blaster AWE32, Sound Blaster 
AWE64, or Sound Blaster Live!  
See the figure on page 14 for an 
example installation for theater-
quality sound reproduction.

Dvd-fm.book  Page 13  Thursday, December 17, 1998  9:44 AM