Fujitsu DX440 S2 Manual De Usuario
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
602
The procedure to release Host-LU QoS is as follows:
Procedure
1
Select the "Host - CA Port - LUN Group" for which the Host-LU QoS is to be released (multiple
selections can be made) and click [Release Host-LU QoS] in [Action].
selections can be made) and click [Release Host-LU QoS] in [Action].
→ A confirmation screen appears.
2
Click the [OK] button.
→ Releasing of the Host-LU QoS starts.
3
Click the [Done] button to return to the [Host-LU QoS] screen.
End of procedure
9.2.7.4
Start Host-LU QoS Performance Monitoring
This function starts performance monitoring of Host-LU QoS.
Target ports for monitoring performance
•
When this function is selected in the [Host-LU QoS] screen, performance monitoring of Host-LU QoS is
started for the following ports:
started for the following ports:
-
All FC, iSCSI, SAS, and FCoE ports that are installed in the ETERNUS DX Disk storage system
-
Ports which port mode are "CA" or "CA/RA"
-
Ports without "
Undefined" status or "
Undefined (Error)" status
•
When this function is selected in each [Port QoS] screen for FC, iSCSI, SAS, or FCoE, performance monitoring
of Host-LU QoS is started for the following ports:
of Host-LU QoS is started for the following ports:
-
Ports that are selected in the [Port QoS] screen for each host interface (multiple selections can be
made)
made)
When this function is started after port selection, ports with different host interfaces cannot be selected at
the same time.
the same time.