Fujitsu DX8100 S2 Manual De Usuario
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
1019
Appendix I
Storage Migration Setting Files
This chapter describes Storage Migration setting files.
I.1
Template File for Storage Migration Settings
The following table shows the details of a template file for storage migration settings.
Keyword
Number of
settings
Allowed input
Type
Specify the type of Storage Migration.
(Example) Type = Open
(Example) Type = Open
1
Open
GROUP
Specify a path group for each source storage system.
Up to 16 path groups can be specified.
Up to 16 path groups can be specified.
•
New format
Specify "0x" (2-digit) + 0 - F (1-digit) with hexadecimal
numbers.
[Example] GROUP=0x0
Specify "0x" (2-digit) + 0 - F (1-digit) with hexadecimal
numbers.
[Example] GROUP=0x0
•
Old format
Specify 0 - F (1-digit) with hexadecimal numbers.
[Example] GROUP=0
Specify 0 - F (1-digit) with hexadecimal numbers.
[Example] GROUP=0
1
•
New format
0x0 - 0xF
("0x" + 1-digit
hexadecimal)
0x0 - 0xF
("0x" + 1-digit
hexadecimal)
•
Old format
0 - F
(1-digit hexadecimal)
0 - F
(1-digit hexadecimal)
OPE-
MODE
MODE
[New format only]
Specify one of the operation modes (M/M+QC/
M+FC/QC/FC) for the Storage Migration.
The following symbols are used for the operation
modes:
Specify one of the operation modes (M/M+QC/
M+FC/QC/FC) for the Storage Migration.
The following symbols are used for the operation
modes:
M: Migration
M+QC: Migration + Quick Compare
M+FC: Migration + Full Compare
QC: Quick Compare
FC: Full Compare
M+QC: Migration + Quick Compare
M+FC: Migration + Full Compare
QC: Quick Compare
FC: Full Compare
OPEMODE can be omitted. When this parameter is
not specified, "Migration" is used.
Refer to
not specified, "Migration" is used.
Refer to
for details.
[Example] OPEMODE=M+QC
OPEMODE is available only when using a template
file with the new format. When a template file
with an old format is used, the conventional mode
("Migration") is used.
file with the new format. When a template file
with an old format is used, the conventional mode
("Migration") is used.
1
M
M+QC
M+FC
QC
FC
M+QC
M+FC
QC
FC