Fujitsu DX8000 Manual De Usuario

ETERNUS DX400/DX8000 series ETERNUSmgr  User Guide Settings/Maintenance

Copyright 2010 FUJITSU LIMITED   

P2X0-0760-02ENZ0

Preface

This guide provides a variety of basic information about ETERNUSmgr for the ETERNUS            
DX410/DX440 and ETERNUS DX8100/DX8400/DX8700.

It should be referred to when ETERNUSmgr is used to monitor, set up and maintain ETERNUS               
DX410/DX440 and ETERNUS DX8100/DX8400/DX8700 (hereafter also referred to as "ETER-         
NUS DX400/DX8000 series" or "device").
Operation management software other than ETERNUSmgr can be also used to monitor the            
ETERNUS DX400/DX8000 series. The ETERNUSmgr backend program, which is embedded in          
the ETERNUS DX400/DX8000 series, is used to display the status of, setup and maintain the              
ETERNUS DX400/DX8000 series. In this guide, function of the ETERNUSmgr backend program           
is also referred to as "ETERNUSmgr".

This guide is specially written for ETERNUSmgr administrators and operators.
Knowledge of UNIX or Windows® system administration and Web server administration are           
required to understand this guide.

This guide is written for controller firmware version V20L5x. Some of the functions herein may              
not be supported for firmware version V20L4x.

Second Edition 

August 2010 

Structure of This Manual

This manual consists of the following nine chapters and three appendixes.

●

This chapter explains the operation windows of ETERNUSmgr.

●

This chapter describes the logon and logoff procedures for the ETERNUSmgr.

●

This chapter describes the various physical and logical status screens.

●

This chapter describes the Getting Started menu's various submenus and their functions.

●

This chapter describes the various RAID group and host connection settings.

●

This chapter describes the Setting menu's various submenu settings.