Memorex Mega TravelDrive Manual De Usuario
2
Thank you for your purchase of the Memorex
®
Mega TravelDrive™. This user’s guide will help you get the maximum
use and enjoyment from your new Mega TravelDrive. The information contained in this document is subject to change
without notice. No part of this manual may be reproduced or transmitted without the written permission of Memorex
Products, Inc. The software described in this document is furnished under a license agreement and may be used
and/or duplicated in accordance with the terms of the license agreement. Terms and conditions of that agreement
can be found during the installation of the software. It is prohibited to copy the software onto any medium except
that which is specifically allowed by the license agreement. One copy of the software is allowed for backup purposes.
without notice. No part of this manual may be reproduced or transmitted without the written permission of Memorex
Products, Inc. The software described in this document is furnished under a license agreement and may be used
and/or duplicated in accordance with the terms of the license agreement. Terms and conditions of that agreement
can be found during the installation of the software. It is prohibited to copy the software onto any medium except
that which is specifically allowed by the license agreement. One copy of the software is allowed for backup purposes.
SAFETY & HANDLING GUIDELINES
• D
DO
O N
NO
OT
T S
ST
TO
OR
RE
E O
OR
R U
US
SE
E in areas exceeding 115° F / 45° C or below 40° F / 4° C. If moving quickly from a
cold to warm environment or from a warm to cold environment, allow the drive to adjust to the new
temperature before connecting it to a computer, this will help avoid problems with condensation.
temperature before connecting it to a computer, this will help avoid problems with condensation.
• D
DO
O N
NO
OT
T U
US
SE
E A
AT
T A
AL
LT
TIIT
TU
UD
DE
ES
S greater than 10,000 ft / 3,050 m or more than 200 ft / 60 m below sea level
unless you are in a pressurized environment such as a commercial airplane. The drive head relies on normal air
pressure to operate properly.
pressure to operate properly.
• D
DO
O N
NO
OT
T R
RE
EM
MO
OV
VE
E,, B
BU
UM
MP
P,, o
orr J
JA
AR
R the drive while it is in operation.
• K
KE
EE
EP
P A
AW
WA
AY
Y from excessive moisture or exposure to liquids. If liquid is spilled into the drive, immediately
unplug it from the computer and dry the drive as well as possible.
• M
MA
AK
KE
E S
SU
UR
RE
E Y
YO
OU
UR
R H
HA
AN
ND
DS
S A
AR
RE
E D
DR
RY
Y when plugging or unplugging the device into a computer.
• D
DO
O N
NO
OT
T S
SU
UB
BJ
JE
EC
CT
T to excessive force or impact.
• K
KE
EE
EP
P A
AW
WA
AY
Y from strong magnetic fields such as powerful electric motors. Excessive magnetic fields can erase
data on the drive.
• D
DO
O N
NO
OT
T dismantle the drive-there are no serviceable parts inside, and dismantling it will void your warranty.
• C
CL
LE
EA
AN
N the device only when it is unplugged from a computer. Use a damp(not excessively wet), lint-free cloth
and prevent moisture from getting into any openings. Do not use any sprays or solvents to clean the device.
FCC Certification Statement
This device complies with FCC Part 15 Class B of the FCC Rules and is designed to provide reasonable protection
against radio and television interference. Although the equipment has been tested and has been found to comply
with the allowed RF emission limits as specified below, there is no guarantee that interference will not occur in certain
situations.
This device complies with FCC Part 15 Class B of the FCC Rules and is designed to provide reasonable protection
against radio and television interference. Although the equipment has been tested and has been found to comply
with the allowed RF emission limits as specified below, there is no guarantee that interference will not occur in certain
situations.
This device’s operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
2. This device must accept any interference received, including interference that may cause undesired operation.
Elimination of interference can occur by using one of the following:
1. Reorient the affected device.
2. Increase the distance between the affected device and the computer equipment.
3. Plug the computer and its peripherals into a different branch circuit from that used by the affected device.
2. Increase the distance between the affected device and the computer equipment.
3. Plug the computer and its peripherals into a different branch circuit from that used by the affected device.
Copyright © 2005 Memorex Products, Inc. All rights reserved. Version 1.0
Memorex Mega TravelDrive and the Memorex logo are registered trademarks in the United States of America.
Memorex Products, Inc. • Cerritos, CA 90703
Microsoft, Windows, and the Windows logos are registered trademarks of the Microsoft Corporation.
Intel and Pentium are trademarks of the Intel Corporation.
Apple and Macintosh are registered trademarks of Apple Computers, Inc.
Adobe and Adobe Acrobat are registered trademarks of Adobe, Inc.
Patent Pending.
All other trade names referred to in this manual belong to their respective owners.
Memorex Products, Inc. reserves the right to change specifications without notice.
Memorex Mega TravelDrive and the Memorex logo are registered trademarks in the United States of America.
Memorex Products, Inc. • Cerritos, CA 90703
Microsoft, Windows, and the Windows logos are registered trademarks of the Microsoft Corporation.
Intel and Pentium are trademarks of the Intel Corporation.
Apple and Macintosh are registered trademarks of Apple Computers, Inc.
Adobe and Adobe Acrobat are registered trademarks of Adobe, Inc.
Patent Pending.
All other trade names referred to in this manual belong to their respective owners.
Memorex Products, Inc. reserves the right to change specifications without notice.