Addonics Technologies ZSNAES256 Manual De Usuario

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)   

Phone: 408-453-6212 

Email: www.addonics.com/support/query/

CipherChain

Cipher

Fan
Switch
CipherChain
Power Connector

eSATA Port
Power LED
HDD LED
Cipher Keyhole
Reset Switch

CipherChain

Cipher

Note: Hot swapping refers to the ability to plug and unplug the component without  

           rebooting.

1.  Insert the AES 256-bit cipher key into the cipher keyhole on the Cipher Z-Drive  

     Cartridge System.

2.  Power on the device.

3.  Observe that the green Power LED should light up. If it does not, re-insert the  

     cipher key and re-power the device or reset the Cipher Z-Drive Cartridge System.

4.  For new drive, go to the operating system’s management utility to partition, format  

     and mount the encrypted drive.

Note: You may remove the cipher key from the Cipher Z-Drive Cartridge System once 

it is powered on. All the files being transferred into the drive are still encrypted even if 

the cipher key is removed.  Always keep a spare master key in a safe place.