Pelco KBD4000 Manual De Usuario
Pelco Manual C1921M-G (1/04)
13
SYSTEM SETUP (VIEW KEY)
2/6/8 Hr
2/6/8 Hr
MAIN MONITOR VIDEO
RESET ACTIVITY DETECTION ALL CH TO
*2,6,or 8 Hr 120 Hr
12 Hr
12 Hr
168 Hr
16 Hr
180 Hr
18 Hr
240 Hr
24 Hr
360 Hr
48 Hr
480 Hr
72 Hr
600 Hr
84 Hr
720 Hr
96 Hr
960 Hr
HIGH RESOLUTION
REDUCED FLICKER
REDUCED FLICKER
MAIN MONITOR DISPLAY HIGH RESOLUTION
**
* 2/6/8 HR FOR NTSC/EIA MODEL MULTIPLEXERS, 3 HR FOR PAL/CCIR MODELS.
REMAINING RECORD SPEEDS DEPEND UPON VCR MODEL.
** NOT SHOWN ON DUPLEX MONOCHROME MODELS OR SIMPLEX MULTIPLEXERS
**
Figure 5. Basic System Setup Menu
To program the main basic system parameters:
1.
Press the MAIN MONITOR key.
2.
Use the number pad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
3.
Press the VIEW key for about three seconds.
4.
Type the password (3916), if requested. Enter it by pressing each number key
followed each time by the CAM key. The System Setup menu appears. The currently
selected menu item blinks.
followed each time by the CAM key. The System Setup menu appears. The currently
selected menu item blinks.
5.
Use the joystick to move among items on the screen. When the menu item you desire
is highlighted (blinking), do one of the following:
is highlighted (blinking), do one of the following:
•
If a menu item has more than one option, press the OPEN key to cycle through
the options to select the one you want.
the options to select the one you want.
•
If a menu item has only one option, press the OPEN key to select it.
Time and Date
Set the current time and date. The time uses a 24-hour clock.
Set the current time and date. The time uses a 24-hour clock.
Time Display
ON – Displays the time on the main monitor.
OFF – The time is not shown on the main monitor.
ON – Displays the time on the main monitor.
OFF – The time is not shown on the main monitor.
Title Display (Duplex Multiplexer)
ON – Displays camera titles and the word LIVE or VCR on the main monitor.
OFF - Camera titles and the word LIVE or VCR are not shown on the main monitor.
ON – Displays camera titles and the word LIVE or VCR on the main monitor.
OFF - Camera titles and the word LIVE or VCR are not shown on the main monitor.
Title Display (Simplex Multiplexer)
ON – Displays camera titles on the main monitor.
OFF - Camera titles are not shown on the main monitor.
ON – Displays camera titles on the main monitor.
OFF - Camera titles are not shown on the main monitor.
NOTE:
Title Display shows
12 characters maximum in
all modes except 16-camera
display, in which only 9 char-
acters are shown.
all modes except 16-camera
display, in which only 9 char-
acters are shown.