Cisco Systems 1552H Manual De Usuario
2-29
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Step 3
Place the clamp bracket on the strand support cable (see
). On each cable support bolt, ensure
that one cable clamp is placed on each side of the support cable. Tighten the two M8 flange nuts to 13
to 15 in. lbs (17.6 to 20.3 Nm). Ensure the cable is mounted to the bottom side of the access point.
to 15 in. lbs (17.6 to 20.3 Nm). Ensure the cable is mounted to the bottom side of the access point.
Figure 2-19
Attach the Cable Strand to the Cable Mount Brackets
1
Strap bracket assemblies
4
Antenna unit assembly (shown with the Low
Profile Dual-Band 2.4/5 GHz Omni Antenna
Array)
Profile Dual-Band 2.4/5 GHz Omni Antenna
Array)
2
Strand support cable
5
F-Connector Adapter (for Cable Modem
models only); sometimes referred to as a
“stringer”
models only); sometimes referred to as a
“stringer”
3
Fiber or Cable bundle
255246
1
4
3
1
2
5