Cisco Systems 1552H Manual De Usuario

2-32

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

OL-24247-01

Chapter 2 Installing the Access Point

Mounting the Access Point

Step 7

Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see

screw the bolt all the way in; leave approximately a 0.25 inch (0.635 cm) space.

Figure 2-22

Position of 1552C or 1552CU Access Point in Pole Mount Bracket

Step 8

Position the two bolts on the access point into the appropriate quick mount notches on each side of the
mounting bracket (see

). Ensure that the hinged door is facing out.

Step 9

Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
point.

Step 10

Ensure that the front of the access point is vertical, and tighten the four bolts to

13 to 15 ft lbs

(17.6 to 20.3 Nm).

Step 11

For the 1552CU access point, continue with

. For the 1552C access point,

continue with

M8 x16 bolt (supplied with pole mount kit)

F-connector

M8 x16 bolt (supplied with pole mount kit)

1579