Cisco Systems CVXC6215SK9 Manual De Usuario

The Cisco VXC 6215 can support remote connections to the thin client using SSH. To provide increased 
security, the ssh_opt add-on (ssh_opt-1.0-1.0.sletc11sp1.rpm) disables SSH functionality by default. 

To enable the SSH functionality on the Cisco VXC 6215 devices using Cisco VXC Manager, in the 
Device Manager, right-click the device and choose Execute Command. In the Execute Command dialog 
box, type /etc/init.d/sshd start to enable the SSH functionality. If the SshOpt add-on is installed on the 
Cisco VXC device, then the SshOpt add-on sets the OpenSSH idle timeout to 30 minutes and the 
maximum timeout to 60 minutes. (These default SSH idle timeout values cannot be modified.)

You can use the Cisco VXC Manager to enable and disable add-ons on your thin client. For more 
information, see Administration Guide for Cisco Virtualization Experience Client Manager. 

To support Unified Communications on the Cisco VXC 6215, you can purchase and install the Voice and 
Video Firmware Add-on. The optional Voice and Video Firmware add-on provides Unified 
Communications functionality for Cisco UC Integration for Microsoft Lync and Cisco Unified Personal 
Communicator.

With the Voice and Video Firmware add-on, users in a virtual environment can use Cisco UC Integration 
for Microsoft Lync or Cisco Unified Personal Communicator from their thin clients. The Voice and 
Video Firmware runs on the thin client, and Cisco UC Integration for Microsoft Lync or Cisco Unified 
Personal Communicator runs on the Windows hosted virtual desktop.

By default with the Base VDI Firmware, the Cisco VXC 6215 supports a power management setting 
(EnergyWise) whereby the clients enter the sleep mode after a specified period of time. When the Voice 
Video Firmware add-on is enabled, this power management setting is disabled, and the clients do not 
enter the sleep mode.

For more information on the optional Voice and Video Firmware add-on, see the Deployment Guide for 
Voice and Video Firmware for Cisco Virtualization Experience Client 6215.

The following are the high-level steps that are required to set up your thin client environment. See the 
referenced guides and 

 for the detailed 

steps required. 

Set up your virtualization server (see your virtualization server documentation).

Install and set up the Cisco VXC Manager (see Installation Guide for Cisco Virtualization Experience 
Client Manager).

Create the INI files to centrally configure the thin clients and place them on the server (see Cisco 
Virtualization Experience Client 6215 INI Files Reference Guide).