Cisco Systems 15454M6DC Manual De Usuario

Use the following steps to create a static route.

Log into the ONS 15454 and select the Provisioning > Network tabs.

Click the Static Routing tab. Click Create.

In the Create Static Route dialog box enter the following: 

Destination—Enter the IP address of the computer running CTC. To limit access to one computer, 
enter the full IP address (in the example, 192.168.1.100). To allow access to all computers on the 
192.168.1.0 subnet, enter 192.168.1.0 and a subnet mask of 255.255.255.0. You can enter a 
destination of 0.0.0.0 to allow access to all CTC computers that connect to the router.

CTC Workstation

IP Address 192.168.1.100

Subnet Mask 255.255.255.0

Default Gateway = 192.168.1.1

Host Routes = N/A

Router #1
IP Address  of interface ”A” to  LAN “A”  192.168.1.1
IP Address of interface  “B” to LAN  “B”   192.168.2.1
Subnet Mask 255.255.255.0

ONS 15454 #2

IP Address 192.168.2.20

Subnet Mask 255.255.255.0

Default Router = N/A

Static Routes = N/A

ONS 15454 #1
IP Address 192.168.2.10
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1

ONS 15454 #3
IP Address 192.168.2.30
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A

LAN B

LAN A

Int "A"

Int "B"

SONET RING

55251

Static Routes
    Destination 0.0.0.0
    Mask 0.0.0.0
    Next Hop 192.168.2.1
    Cost = 2

LAN C

LAN D

Router #3

Router #2