Cisco Systems 15454M6DC Manual De Usuario
7-9
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 7 Card Provisioning
Provisioning Electrical Cards
Note
If the DS3E is installed in an ONS 15454 slot that is provisioned for a DS-3 card, the DS3E enhanced
performance monitoring parameters are not available. If this occurs, remove the DS3E from the ONS
15454, delete the DS-3 card in CTC, and provision the slot for the DS3E.
performance monitoring parameters are not available. If this occurs, remove the DS3E from the ONS
15454, delete the DS-3 card in CTC, and provision the slot for the DS3E.
Procedure: Modify Line and Threshold Settings for the DS3E Card
Step 1
Display the DS3E-12 or DS3EN-12 in CTC card view.
Step 2
Click the Provisioning tab.
Step 3
Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Thrshld subtab.
Thrshld subtab.
Note
See
for information about the Alarm
Behavior tab.
Step 4
Modify the settings shown in
. For drop-down lists, select an item from the list.
For numerics, double-click the field and type the new number.
Table 7-4
DS3E Card Parameters
Subtab
Parameter
Description
Options
Line
Port #
Port number
•
1 - 12
Port
Port name
To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
cell and type the name. To change a
name, double-click the cell, then edit
the text.
Line Type
Defines the line framing type
•
M23
•
C Bit
•
Auto Provisioned
Detected
Line Type
Line Type
Displays the detected line type
Read-only
Line
Coding
Coding
Defines the DS3E transmission
coding type
coding type
•
B3ZS
Line
Length
Length
Defines the distance (in feet)
from backplane connection to
the next termination point
from backplane connection to
the next termination point
•
0 - 225 (default)
•
226 - 450
Status
Places port in or out of service
Out of Service (default)
In Service