Cisco Systems 15454M6DC Manual De Usuario
9-8
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 9 Ethernet Operation
Ethernet Circuit Configurations
Step 5
Navigate to the other ONS 15454 Ethernet circuit endpoint.
Step 6
Repeat Steps 2 – 5.
Step 7
Click the Circuits tab and click Create.
The Circuit Creation (Circuit Attributes) dialog box opens
.
Figure 9-7
Provisioning an Ethernet circuit
Step 8
In the Name field, type a name for the circuit.
Step 9
From the Type pull-down menu, choose STS.
Step 10
The VT and VT Tunnel types do not apply to Ethernet circuits.
Step 11
Choose the size of the circuit from the Size pull-down menu.
The valid circuit sizes for an Ethernet Multicard circuit are STS-1, STS-3c and STS6c.
The valid circuit sizes for an Ethernet Single-card circuit are STS-1, STS-3c, STS6c and STS12c.
Step 12
Verify that the Bidirectional checkbox is checked and click Next.
The Circuit Creation (Circuit Source) dialog box opens
.
Figure 9-8
Choosing a circuit source
Step 13
Choose the circuit source from the Node menu. Either end node can be the circuit source.