Cisco Systems 15454M6DC Manual De Usuario
1-28
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 1 Hardware Installation
Power and Ground Installation
Figure 1-21 Installing the fan-tray assembly
1.8 Power and Ground Installation
This section explains how to connect the ONS 15454 assembly to the power supply. Ground the
equipment according to Telcordia standards or local practices.
equipment according to Telcordia standards or local practices.
Warning
Shut off the power from the power source or turn off the breakers before beginning work.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth ground
during normal use.
during normal use.
Caution
Always use the supplied ESD wristband when working with a powered ONS 15454. Plug the
wristband cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
wristband cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
Warning
Do not mix conductors of dissimilar metals in a terminal or splicing connector where physical
contact occurs (such as copper and aluminum, or copper and copper-clad aluminum), unless the
device is suited for the purpose and conditions of use.
contact occurs (such as copper and aluminum, or copper and copper-clad aluminum), unless the
device is suited for the purpose and conditions of use.
FAN
FAIL
CRIT
MAJ
MIN
Fan tray
assembly
38532