Connect Tech CTIM-00043 Manual De Usuario
CANpro/104 User Manual
CTIM-00043 (0.01) 1/15/2010
www.connecttech.com
5
800-426-8979 | 519-836-1291
Introduction
CANpro/104 combines the power of two independent NXP SJA1000 CAN controllers with the compact size
and rugged stability of PC/104. CANpro/104 is ideal for industrial control applications exposed to harsh
conditions or environments. CANpro/104 Opto models feature 2.5 kV of data and power isolation.
and rugged stability of PC/104. CANpro/104 is ideal for industrial control applications exposed to harsh
conditions or environments. CANpro/104 Opto models feature 2.5 kV of data and power isolation.
Features
●
Two independent, industry standard NXP SJA1000 CAN controllers
●
PC/104 compliant
●
16MHz input clock (24MHz build option available)
●
Fail-safe power-up/power-down using on-board impendence transceivers to maximize nodes on the bus
and ensure glitch-free operation.
and ensure glitch-free operation.
●
Supports up to 1.0 Mbps operation and over 120 nodes on the bus
●
2000 V(AC) 50/60 Hz sine wave, 2500 V (peak) signal and power isolation for each port from the host
system (on CANpro/104 Opto models only)
system (on CANpro/104 Opto models only)
●
Jumper configurable:
●
address range and interrupt sharing
●
output slew rate limiting for lower radiated emissions
●
-120 Ohm CAN bus termination
●
Decoded address range is configurable for BasicCAN and PeliCAN modes
●
Ten pin right angled header standard as an I/O connector (DB-9 option available)
●
Operating temperature range of -40°C to +85°C
●
+5V power output on some models
RoHS compliant