Cisco Systems 1550 Manual De Usuario
2-16
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Caution
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb
(22.7 kg) static weight.
(22.7 kg) static weight.
To mount the access point on a vertical wall, follow these instructions:
Step 1
Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See
for the mounting bracket screw hole locations. You can optionally use the individual
mounting holes or the mounting slots.
Table 2-1
Material Needed to Mount the Mounting Bracket to a Vertical Wall
Materials Required
In Kit
•
Ground lug and screws (provided with access point)
•
Crimping tool for ground lug, Panduit CT-720 with
CD-720-1 die (http://onlinecatalog.panduit.com)
CD-720-1 die (http://onlinecatalog.panduit.com)
•
Four M8 or 5/16 in. (31 mm) screws
•
Four wall anchors (specified for wall material)
•
Drill bit for wall anchors
•
Electric drill and standard screwdriver
•
#6-AWG ground wire
•
Shielded outdoor-rated Ethernet (CAT5e or better) cable
•
Grounding block
•
Grounding rod
•
13-mm box-end wrench or socket set
Yes
No
No
No
No
No
No
No
No
No
No