Intel 845 Manual De Usuario
Functional Description
R
116
Intel
®
82845 MCH for SDR Datasheet
C/BE[3:0]# Intel
®
MCH
PCI Command
Encoding
Cycle Destination
Response as a FRAME#
Target
Dual Address Cycle
1101
N/A
No response
Memory Read Line
1110
System Memory
Read
1110
Hub interface
No response
Memory Write and
Invalidate
Invalidate
1111
System memory
Posts data
1111
Hub
interface
Posts
Data
NOTES:
1. N/A refers to a function that is not applicable
As a target of an AGP FRAME# cycle, the MCH only supports the following transactions:
•
Memory Read, Memory Read Line, and Memory Read Multiple. These commands are
supported identically by the MCH. The MCH does not support reads of the hub interface bus
from AGP.
supported identically by the MCH. The MCH does not support reads of the hub interface bus
from AGP.
•
Memory Write and Memory Write and Invalidate. These commands are aliased and processed
identically.
identically.
•
Other Commands. Other commands (e.g., I/O R/W and Configuration R/W) are not supported
by the MCH as a target and result in master abort.
by the MCH as a target and result in master abort.
•
Exclusive Access. The MCH does not support PCI locked cycles as a target.
•
Fast Back-to-Back Transactions. The MCH, as a target, supports fast back-to-back cycles
from an AGP FRAME# initiator.
from an AGP FRAME# initiator.
As an initiator of AGP FRAME# cycle, the MCH only supports the following transactions:
•
Memory Read and Memory Read Line. MCH supports reads from host to AGP. MCH does
not support reads from the hub interface to AGP.
not support reads from the hub interface to AGP.
•
Memory Read Multiple. This command is not supported by the MCH as an AGP FRAME#
initiator.
initiator.
•
Memory Write. The MCH initiates AGP FRAME# cycles on behalf of the host or the hub
interface. As an initiator, the MCH does not issue Memory Write and Invalidate cycles. The
MCH does not support write merging or write collapsing. The MCH allows non-snoopable
write transactions from the hub interface to the AGP bus.
interface. As an initiator, the MCH does not issue Memory Write and Invalidate cycles. The
MCH does not support write merging or write collapsing. The MCH allows non-snoopable
write transactions from the hub interface to the AGP bus.
•
I/O Read and Write. I/O read and write cycles from the host are sent to the AGP bus. The I/O
base and limit address range for the AGP bus are programmed in the configuration registers.
All other accesses that do not correspond to this programmed address range are forwarded to
the hub interface.
base and limit address range for the AGP bus are programmed in the configuration registers.
All other accesses that do not correspond to this programmed address range are forwarded to
the hub interface.
•
Exclusive Access. The MCH does not issue a locked cycle on the AGP bus on behalf of either
the host or the hub interface. The hub interface and host locked transactions to AGP are
initiated as unlocked transactions by the MCH on the AGP bus.
the host or the hub interface. The hub interface and host locked transactions to AGP are
initiated as unlocked transactions by the MCH on the AGP bus.
•
Configuration Read and Write. Host configuration cycles to AGP are forwarded as Type 1
configuration cycles.
configuration cycles.
•
Fast Back-to-Back Transactions. The MCH, as an initiator, does not perform fast back-to-
back cycles.
back cycles.