Aleratec 350112 Manual De Usuario

www.aleratec.com

39

Main Menu
Adv Setup

This function is used to update the 1:5 HDD Cruiser firmware to a later version. 

Note: Firmware updates are available from Aleratec technical support.    

1.a  CD method 

Open the case of the 1:5 HDD Cruiser . Disconnect the SATA cable from the blue 

connector on the controller board.  Connect a SATA DVD/CD drive (not included) 

to the blue connector.  Place the firmware CD in the DVD/CD drive. 

1.b  Hard Drive method 

Format a hard drive and create a single partition to the smallest capacity 

allowable. Copy the firmware file into the root directory of this partition. 

2.  Power on the 1:5 HDD Cruiser. Once the system has completed its startup 

process, press and hold the ESC button for about 3 seconds to access “Adv 

Setup”. The following screen will be displayed. 

3.  Use the arrow buttons () to select “Update Firmware”, and then press 

ENT. The system will begin scanning for a new firmware version. If found, 

screens similar to the following will be displayed.

4.  Press ENT to begin the firmware update. If the upgrade is successful, the 

system will restart automatically. 





