Albatron Technology KI51PV-754 Manual De Usuario

 
 
 
 
 

 54 

11. After you have recovered your onboard BIOS, you can choose to remove or not remove the 

ABS Card from the mainboard.   
If you do choose to remove the ABS Card from the mainboard, make sure that the system is 

powered off before you remove the card. After you remove the ABS card you must replace the 

two jumper caps on the BIOSCN1 header back to the default positions (pins 1-2 and pins 3-4 

are both closed as shown). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
If you choose not remove the ABS Card from the mainboard, make sure that the jumper caps on 
the ABS_JP1 header located on the ABS Card to the “

” as below, in order to 

reduce the damage opportunity of the rescue BIOS in ABS Card and on the other hand to 
extend the usage life of the ABS Card. 
 
 
 
 
 
 

(“Closed” means putting a jumper cap 
onto two adjacent header pins.)

 

Attention 
If both your onboard BIOS and rescue BIOS are damaged 
unfortunately, the ABS Card will fail the feature of providing BIOS 
backup. Therefore, it is recommended that recover the onboard BIOS in 
advance, and take the ABS Card as emergency happen. 

Closed