Black Box ServSwitch Freedom Manual De Usuario
ServSwitch Freedom
724-746-5500 | blackbox.com
Page 26
4.4 Multi-Monitor Glide and Switch configuration
4.4.1 Installing drivers and multi-monitor config app
In order to use Multi-Monitor mode you will need to install a Multi-Monitor Glide and Switch driver (available for download from
the Black Box website. Go to the KV0004A product page and click on the 'Resources' tab) onto each PC that has multiple
monitors attached.
the Black Box website. Go to the KV0004A product page and click on the 'Resources' tab) onto each PC that has multiple
monitors attached.
1. On each multiple monitor PC, run the downloaded file. After accepting the licence agreement you will be prompted to choose
a destination folder. Either accept the suggested location or change it, as necessary.
Note: The
Install for all users option should be ticked if there are more than one user account on the PC and all need to use
Glide and Switch.
2. The options available during installation are as follows:
•
Full Install, (this is recommended), or
• Options to install individually:
•
Configuration App.
This is the Glide and Switch application and needs to be installed only on the PC that will be used to set up the
ServSwitch Freedom switch via the supplied flash upgrade cable and
This is the Glide and Switch application and needs to be installed only on the PC that will be used to set up the
ServSwitch Freedom switch via the supplied flash upgrade cable and
OPTIONS
port.
•
Visual C++ Runtime
The C++ runtime library is a windows component that is required by the multi-monitor driver in order to run its helper
applications. It is pre-installed with Windows but is offered here as an option as you may want to keep an older version
already installed on your system, or you may already have a newer version in your copy of Windows.
The C++ runtime library is a windows component that is required by the multi-monitor driver in order to run its helper
applications. It is pre-installed with Windows but is offered here as an option as you may want to keep an older version
already installed on your system, or you may already have a newer version in your copy of Windows.
•
Drivers.
Multi-Monitor Glide and Switch drivers that are required on each PC that will be using Multi-Monitor.
Multi-Monitor Glide and Switch drivers that are required on each PC that will be using Multi-Monitor.
Choose the required components and click the
Next > button.
3. Once the chosen components have been installed, click the
Finish button.
Note: On the PC that will be used to set up the ServSwitch Freedom switch, you can optionally tick ‘Click to run the Glide and
Switch Configuration Application’ in the lower left corner to immediately begin using Glide and Switch - see 4.5 Configuring
multiple monitors opposite for details.
multiple monitors opposite for details.
Note: On each PC that you installed the driver, a process called
mumoapp.exe will remain running.
(Windows only)