Black Box ACU5250A-R2 Manual De Usuario

Chapter 3: Installation

724-746-5500   |   blackbox.com 

Page 25

This flash sequence 

indicates that you 

are at Standby level  

Num

Loc

k

Caps

Loc

k

Scroll

Loc

k

The indicators on the keyboard linked to the remote unit will begin to flash in sequence. 

Also, the green indicator adjacent to the CATx link socket will flash.  

Note: During video compensation mode, the keyboard and any other connected USB devices will 
be temporarily isolated from the computer.     

2

  You are now at the 

standby level within video compensation mode. 

  From standby, you can choose which adjustments to make. Generally you should set the cable type and cable length options 

first. Then, if necessary, use the video gain and color skew adjustments to fine tune the remote video image.

 

Please see the next page for details about each adjustment >>> 

  When your adjustments are complete, return the unit to normal operation as described below:

3.4.2 To exit video compensation mode (return to normal operation)

1  Ensure that you are at standby level by exiting from any adjustment options. 
2  On the remote unit, return the miniature switch 

1 to its OFF position.

  All USB devices will be reconnected to the computer and normal operation will continue.   

3.4.1 To enter video compensation mode

1  Ensure that the two ServSwitch Wizard VGA-USB units are connected to the computer and powered on. A USB keyboard must 

be connected to the remote unit.  

2  Arrange your test images on the remote screen. Please refer to the section ‘Test images while compensating’ shown bottom 

left.

3  On the remote unit, click the miniature switch 

1 to its ON position.