Black Box KVT8CATUV Manual De Usuario

ServView KVM Module

724-746-5500   |   blackbox.com 

Page 10

3. Installation

3.1 Mounting

The KVM module is designed to interlock precisely with the rear of the ServView rack tray.

1  If the ServView rack tray is already fitted, either remove it or carefully gain access to the rear of the rack mount unit.

2  Locate the connection plate at the rear of the rack tray and orientate the KVM module so that its universal Centronics

®

 36-pin 

connector aligns with the socket on the connection plate. See Figure 3-1.

Figure 3-1. Aligning the KVM module with the connection plate of the rack tray.

3  Carefully slide the KVM module in so that its connector and two locating holes mate correctly with the corresponding connec-

tor and locating pins on the connection plate.

4  Tighten the locking screw until it is finger tight.

Rack tray connection plate
(as viewed from the pull out 
keyboard - side rails not 
shown for clarity).