Black Box KV0004A-LED Manual De Usuario

Descargar
Página de 43
ServSwitch Freedom
724-746-5500   |   blackbox.com 
Page 28
4.5 Configuring LED indicators
When the optional ServSwitch Freedom LED Monitor indicator kit is used, there are several configuration options available that 
allow you to customise behavior and these are set using the 
 application.
4.5.1 Adjusting color and brightness for all indicators
If necessary, you can impose default color and brightness settings upon all connected LED monitor indicators. Choose the 
Configure > LEDs... menu item to display the following popup. See Figure 4-5.
Figure 4-5. Configuring LED default color and brightness for all indicators
To impose a default color on all connected indicators, choose the required 
Default color and then tick the option Set all LEDs 
to this color
Use the 
Default brightness option to determine the intensity of all indicators.
Click 
OK to exit and apply the required settings. 
Note: Once default settings have been made you can optionally change any or all indicators individually as required using the 
steps outlined below. 
   
4.5.2 Adjusting individual indicators
For each installed video display screen, you have the opportunity to add and configure an LED monitor indicator.
4.5.2.1 To adjust details for an individual indicator 
1. Double-click on a screen representation (or right click on a screen representation and then choose 
Properties) to display the 
screen popup. 
2. Click the 
LED Set-up tab to display the indicator details. See Figure 4-6.
Figure 4-6. The LED Setup dialog