abit IL-90MV Manual De Usuario
2.5.2 DDR2 Memory Slots
This motherboard provides two 240-pin DIMM slots for Dual Channel DDR2 667/533 memory
modules with memory expansion size up to 2GB.
modules with memory expansion size up to 2GB.
※ To reach the optimum performance in dual-channel configurations, install DDR
DIMM pairs at the same density, DRAM technology and bus width for both slots.
To install system memory:
1. Power off the computer and unplug the AC power cord before installing or removing
memory modules.
2. Locate the DIMM slot on the board.
3. Hold two edges of the DIMM module
carefully, keep away of touching its
connectors.
connectors.
4. Align the notch key on the module with
the rib on the slot.
5. Firmly press the module into the slots
until the ejector tabs at both sides of the slot automatically snaps into the mounting notch.
Do not force the DIMM module in with extra force as the DIMM module only fit in one
direction.
Do not force the DIMM module in with extra force as the DIMM module only fit in one
direction.
6. To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
※ Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
discharged of static electricity by touching a grounded metal object briefly.
2-12
iL-90MV