abit IL-90MV Manual De Usuario

BIOS Setup

iL-90MV

3-17

3.5 Power Management Setup

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Suspend Type

S3(Suspend To RAM)

Item Help

- Resume by USB From S3

Enabled

Power Button Function

Instant-Off

CPU THRM-Throttling

50.0%

Wake Up by PME# of PCI

Disabled

Wake Up by WAKE# of PCIe

Disabled

Wake Up by Onboard LAN

Disabled

Wake Up by Onboard 1394

Disabled

Wake Up by Alarm

Disabled

X - Date(of month) Alarm

X - Time(hh:mm:ss) Alarm

0 : 0 : 0

Power On Function

Button Only

X - KB Power On Password

Enter

X - Hot Key Power On

Ctrl-F1

Restore On AC Power Loss

Power Off

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type

This item selects the type of Suspend mode.

[S1(PowerOn Suspend)]: Enables the Power On Suspend function.

[S3(Suspend To RAM)]: Enables the Suspend to RAM function.

Resume by USB From S3

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].

Power Button Function

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system.
This will prevent the system from powering off in case you accidentally hit or pushed the power
button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power
off the system.

Wake Up by PME# of PCI

When set to [Enabled], access through the add-on PCI card can remotely wake up the system
that was in Soft-Off condition. The PCI card must support the wake up function.