Manualsbrain.com
  1. Manuales
  2. Marcas
  3. National Instruments
  4. 3.21E+04
  5. Manual De Usuario

National Instruments 3.21E+04 Manual De Usuario

Descargar
Página de 181
Appendix C     Common Questions
AT-MIO/AI E Series User Manual
C-2
 National Instruments Corporation
that some AT E Series boards have settling times that vary with 
gain and accuracy.  See Appendix A for exact specifications.
4.
What type of 5 V protection do the AT E Series boards have?
The AT E Series boards have 5 V lines equipped with a 
self-resetting 1 A fuse.
Installation and Configuration
5.
How do I configure an AT E Series board on an EISA computer?
You must configure the board with 
DAQCONF
 or 
WDAQCONF
; you 
cannot use an EISA configuration utility to configure the board.
6.
How do you set the base address for an AT E Series board?
Under the AT E Series device option, there is a field for base I/O 
address; type in the desired base I/O address.  0x180, 200, 220, 240, 
280, and 300 are typical base addresses.
7.
What jumpers should I be aware of when configuring my 
AT E Series board?
The AT E Series boards do not contain any jumpers; they are also 
switchless.
8.
Which National Instruments manual should I read first to get 
started using DAQ software?
If you are using LabVIEW, Chapter 1 of the LabVIEW Data 
Acquisition VI Reference Manual is the best place to get started.  If 
you are programming with NI-DAQ function calls or using 
LabWindows/CVI, the NI-DAQ User Manual for PC Compatibles 
is the best starting place.
9.
What version of NI-DAQ must I have to program my AT E Series 
board?
You must have version 4.9.0 or higher for the AT-MIO-16XE-10 
and AT-AI-16XE-10, version 4.8.0 or higher for the 
AT-MIO-16E-1, and version 4.6.1 or higher for all other 
AT E Series boards.