VisionTek HD 3450 Manual De Usuario
AMD HD5450 / AMD HD4670 /
AMD HD4350 / AMD HD3450
Hardware Installation
Installation Procedures
!! WARNING!!
Discharge static electricity by
touching the GROUND such
as metal part of your case
connected with good power
ground before you handle the
electronic circuit boards.
The manufacturer assumes no liability for any damage, caused directly or
indirectly, by improper installation of any components by unauthorized service
personnel. If you do not feel comfortable performing the installation, consult
with a qualified computer technician
indirectly, by improper installation of any components by unauthorized service
personnel. If you do not feel comfortable performing the installation, consult
with a qualified computer technician
.
Note: Make sure that your system has an adequate power supply.
1. Make sure the computer, monitor, and other peripheral devices
are off.
2. Unplug the computer power cord and disconnect the monitor
cable from the back panel of the computer.
Caution:
Caution:
To avoid possible damage to the motherboard, wait
approximately 20 seconds after unplugging the power cord
before disconnecting a peripheral or removing a
component from the motherboard.
approximately 20 seconds after unplugging the power cord
before disconnecting a peripheral or removing a
component from the motherboard.
3. Remove the computer cover.
Caution:
Remember to discharge your body’s static electricity by
touching the power supply case or the metal surface of the
computer chassis.
Tip: If necessary, consult the computer manual for help
removing the cover.
touching the power supply case or the metal surface of the
computer chassis.
Tip: If necessary, consult the computer manual for help
removing the cover.
C o p y r i g h t © 2 0 1 1 J a t o n C o r p o r a t i o n , U S A
18