Black Box HDMCII VDSL2 LAN Extender Module (Extended Temp) Manual De Usuario
Chapter 3: Configuration
LMC5601C-VDSL2
724-746-5500 | blackbox.com
Page 11
Traps can also be set in the iView
2
software. A Trap will be generated on
any Loss of Signal (LOS); but more importantly, the end user can set a VDSL
Quality Level that will generate a trap if the line fails below the assigned
level.
Quality Level that will generate a trap if the line fails below the assigned
level.
3.8 LINK Quality
Link Quality is defined by 4 values: 8,4,2,1. The four green LEDs form a
binary code indicating the maximum bandwidth the VDSL line can support.
The appropriate LED will light once the line quality is dynamically detected.
This represents the maximum Downstream data rate (Kbps) the line can
support based upon line noise and line length. The Upstream rate will be
less based on the Base Plan used.
Link Quality is defined by 4 values: 8,4,2,1. The four green LEDs form a
binary code indicating the maximum bandwidth the VDSL line can support.
The appropriate LED will light once the line quality is dynamically detected.
This represents the maximum Downstream data rate (Kbps) the line can
support based upon line noise and line length. The Upstream rate will be
less based on the Base Plan used.
3.9 Forcing Duplex Mode
The DATA port can be manually configured on the HDMCII VDSL2 LAN
Extender Module (Extended Temp) for Half- or Full-Duplex operation. Before
manually setting the duplex mode, disable Auto Negotiation (Set DIP Switch
#5 to OFF).
The DATA port can be manually configured on the HDMCII VDSL2 LAN
Extender Module (Extended Temp) for Half- or Full-Duplex operation. Before
manually setting the duplex mode, disable Auto Negotiation (Set DIP Switch
#5 to OFF).
• Full-Duplex for the DATA port is configured by setting DIP Switch #8 to
the OFF position (default).
• Half-Duplex for the DATA port is configured by setting DIP Switch #8 to
the ON position.