Black Box LEH1008A-2GSFP Manual De Usuario
![Black Box](https://files.manualsbrain.com/attachments/93f582e81b91156050f0dfb0bd85a42bc8635e07/common/fit/150/50/2f54d4d876583e31f45c92e398ef3997c2dece9a115125c2fd1224ff9c81/brand_logo.png)
724-746-5500 | blackbox.com
Page 97
Chapter 7: Command-Line Management
Figure 7-20.
7.2 System
System Information, System Name/Password, IP Address, Save Configuration, Firmware Upgrade, Reboot, Logout, User Account,
User Privilege
User Privilege
System Name/Password
System Name:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use hostname command to set or change the network server name.
Use the no hostname command to disable this function.
3. Command Syntax:
(no) hostname HOSTNAME
HOSTNAME specifies the network name of the system.
4. Example:
The following example sets the hostname to switch, and shows the change in the prompt:
switch_a(config)#hostname switch
switch(config)#
Password:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#