Black Box VX-HDMI-IP-VTX Manual De Usuario
724-746-5500 | blackbox.com
Page 16
Chapter 2: Overview
Table 2-2. Components of the Receivers.
Number
Component
Description
1
Barrel connector for power
Links to power supply
2
Reset button
System reset
3
RJ-45 jack
Connects to the 10-/100-/
1000-Mbps network switch
1000-Mbps network switch
4
Video connector
Connects to the HDMI monitor
5
Network Status LED
Flashing: Connected to network
Goes off once: Abnormal
Goes off once: Abnormal
6
Function button
See Section 2.6.4.
7
Rotary switch
Set up an identical position for all
units
units
8
RJ-12 connector
Serial port 1: For system control
9
RJ-12 connector
Serial port 2: For data transfer
10
Power/Link LED
Red: Power on
Interlaced flashing Blue + Red:
Connected to network
Blue: Connected to transmitter
Interlaced flashing Blue + Red:
Connected to network
Blue: Connected to transmitter
2.6.3 Indicators
The LEDs on the extender units show the real-time status indicating the linking and
communication between the Transmitter/Sender unit and the Receiver unit. Users
can identify the current status through the LED indicators on the unit.
The quality of the output signal will depend largely upon the quality of the video
communication between the Transmitter/Sender unit and the Receiver unit. Users
can identify the current status through the LED indicators on the unit.
The quality of the output signal will depend largely upon the quality of the video