Black Box MediaCentro IPX Manual De Usuario
724-746-5500 | blackbox.com
Page 17
Chapter 2: Overview
source, cable, and display device used. Low-quality cables degrade output signals,
causing elevated noise levels. Use the proper cable and make sure the display device
can handle the resolution and refresh rate selected.
NOTE: The system will disable the video output signal when it detects non-HDCP-
causing elevated noise levels. Use the proper cable and make sure the display device
can handle the resolution and refresh rate selected.
NOTE: The system will disable the video output signal when it detects non-HDCP-
compliant display(s) trying to play on the HDCP video source. All the
connected output displays MUST be HDCP compliant when the video source
is HDCP compliant.
connected output displays MUST be HDCP compliant when the video source
is HDCP compliant.
2.6.4 Function Button
The Function button on the extender units operates as described in Table 2-3.
Table 2-3. Function button.
Action
Description
Press for 1 second.
Toggle between graphics and
video mode.
video mode.
1. Press and hold the Function button.
2. Apply power to the receiver unit.
3. Release right after the Network
2. Apply power to the receiver unit.
3. Release right after the Network
Status LED starts blinking.
EDID copy (Receiver unit only!)