Cypress CY8CLEDxx Manual De Usuario

Page 9 of 28 

5.4-011808 

 
 
 
 
Prototyping  Modules (CY3210-2xxxx) 
 
PSoC Prototyping Modules are 28-pin PDIP adapters that 
seamlessly connect any PSoC device package-type to the 28-
pin PDIP connector that is default on Cypress PSoC kits. Check 
the selection tables in the Kit Components and Accessories 
section of this document for a list of Prototyping Modules 
offered by Cypress. (Note: Prototyping Modules may sometimes 
be referred to as Evaluation PODs.) 
 
Prototyping Modules offer quick and easy prototyping of any 
PSoC device and package on a board with just a 600-mil 28-Pin 
ZIF socket (included in many of our kits, and easy for a user to 
acquire and build on their own.)  
 
Prototyping Modules feature: 

•  28-pin DIP footprint (0.6 in width).  Fits in a ZIF socket or 

breadboard 

•  ISSP programming header enables programming via ISSP 

•  Connector for CAT5 cable connection to the ICE-cube 

•  Port pin-out for 28 pins on bottom of the pod matches port pin-

outs for the 28 pin PDIP PSoC 

•  Pins for emulating parts with >28 pins are accessible via 

receptacles on top of the prototyping module 

 
Prototyping Modules (CY3210-2xxxx) are not to be confused with Emulation PODs (CY3250-2xxxx), 
although they also connect to the ICE-Cube (CY3215-DK). 

 
 
 
 

 
 

The main purpose of the I

2

C -USB Bridge is to test, tune, and debug programs that have an I

2

C slave 

interface. This application can also be useful for data acquisition and regulation under PC control. 
Cypress offers CY3240-I2USB that supports I

2

C interface and communication to test, debug and tune 

device designs in many PSoC kits. 
There is a table of I

2

C -USB Bridge kits located in the Appendix. 

 

 
 
 

 

 

USB 

CY3240-I2USB

Bridge  

PSoC Express 

The I

2

C-USB bridge allows 

hardware and software 
debug of PSoC Express 
applications by bridging the 
USB port to I

2

C.