SMC Networks 1232 Series Manual De Usuario
50
• Note(!): IRQ 11 can’t be used by peripherals connected to the ISA BUS if the printed
circuit board code ends with the letter “S” (PC100112S). If the printed circuit board
code ends with the letter “A” (PC100112S), there aren’t any problems.
code ends with the letter “A” (PC100112S), there aren’t any problems.
• Note: not all consecutive IRQ numbers from 3 to 15 can be used; to help the selection, the
Setup program displays legal IRQ numbers only.
• Note: if the IRQ is shared, all the ports using the same share number can use the same IRQ
number
.
Serial Port2 (J6)
The Serial Port2 Mode is fixed: RS232
Serial Port2 Addresses
Option
Description
Note
Disabled
Disable the serial port
3F8h
Serial Port address selected at 3F8h
2F8h (*)
Serial Port address selected at 2F8h
(*) = Default setting
3E8h
Serial Port address selected at 3E8h
2E8h
Serial Port address selected at 3E8h
Serial Port2 IRQ
Option
Description
Note
None
No IRQ selected
3 (*)
IRQ 3 selected
(*) = Default setting
4
IRQ 4 selected
5
IRQ 5 selected
7
IRQ 7 selected
9
IRQ 9 selected
10
IRQ 10 selected
11
IRQ 11 selected
See Note(!) below
12
IRQ 12 selected
• Note(!): IRQ 11 can’t be used by peripherals connected to the ISA BUS if the printed
circuit board code ends with the letter “S” (PC100112S). If the printed circuit board
code ends with the letter “A” (PC100112A), there aren’t any problems.
code ends with the letter “A” (PC100112A), there aren’t any problems.
Parallel Port
Parallel Port Address
Option
Description
Note
Disabled
Disable the serial port
0378h (*)
Parallel Port address selected at 378h
(*) = Default setting
0278h
Parallel Port address selected at 278h
Parallel Port IRQ number
Option
Description
Note