Intel CB60-ZX Manual De Usuario

Hardware Installation

2.6 Jumper Settings for Wake-On-Keyboard/

Wake-On-Mouse

Jumper JP1

Wake-On-Keyboard/Wake-On-Mouse

The system board supports the Wake-

On-Keyboard/Wake-On-Mouse function.

This function allows you to use the

keyboard or mouse to power-on the

system. By default, JP1 is disabled. To use

this function, set JP1 to 2-3 On.

Keyboard/Mouse Power On in the

Integrated Peripherals setup of the

Award BIOS must be set accordingly.

Refer to chapter 3 for details.

Warning:

1. If JP1 was previously enabled

with a password set in the

KB Power On Password field, and now you wish to disable

the Wake-On-Keyboard (password) function, make sure to

set the Keyboard/Mouse Power On field to Disabled prior

to setting JP1 to disabled. You will not be able to boot up

the system if you fail to do so.

2. The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals setup. You must type the

correct password to power-on the system.

3. The 5VSB power source of your power supply must

support

≥

720mA (minimum).

2-3 On: Enable

1-2 On: Disable

(default)