Inova ICP-PII Manual De Usuario
©2001 Inova Computers GmbH
Page B-2
CPU Appendix-B
ICP-HD
Appendix B
B1 ICP-HD CPU Extension
Several hard-disk connection possibilities exist of which two are documented here. Both of these
provide additional CPU functionality in the form of PS-2 style mouse and keyboard connectors
and serial COM1 and COM2 ports.
provide additional CPU functionality in the form of PS-2 style mouse and keyboard connectors
and serial COM1 and COM2 ports.
B1.1 J11, J13 Interfaces
The control of the mouse, keyboard, COM1 & COM2 interfaces is performed through the J11 and
J13 connectors respectively on the CPU base board. The location of these connectors may be
determined by referring to Section 1 - Product Overview of the CPU User’s Manual. A flex cable
from J11 and J13 connects to the interface boards discussed in this section.
J13 connectors respectively on the CPU base board. The location of these connectors may be
determined by referring to Section 1 - Product Overview of the CPU User’s Manual. A flex cable
from J11 and J13 connects to the interface boards discussed in this section.
B1.2 ICP-HD-1 & Front-panel (4HP or 8HP)
The Inova ICP-HD-1 interface is an IDE device carrier board available as a stand-alone device with
its own 4HP front-panel or integrated with the CPU as in figure B1.2.
its own 4HP front-panel or integrated with the CPU as in figure B1.2.
Figure B1.2 ICP-HDE8 Stand-Alone or Integrated with CPU