Renesas 32176 Manual De Usuario

32176 Group 

Starter Kit User’s Manual M3A-2152 

REJ10B0224-0300/Rev.3.00 

Jan. 2007 

Page 18 of 82 

 

6.1.2 Starting 

M3T-PD32RM 

Before starting M3T-PD32RM, make sure the hardware components have been set up in 
accordance with the instructions in 5.1 Hardware Setup when M3A-2152G52A in Use, and that 
the Starter Kit hardware system (M3A-2152 Evaluation Board and M32100T-EZ-E) have been 
powered on. Make sure that M3T-PD32RM cannot be started unless the power to the hardware 
system is turned on. 

 

To start M3T-PD32RM, choose   
  [Start] -> [Programs] -> [Renesas] -> [PD32RM V3.01 Release 00] -> [PD32RM]     
from Start menu of Windows. When M3T-PD32RM starts, the initialize dialog box shown in 
Figure 6.2 appears. So initialize M3T-PD32RM from this dialog box. 

 

 

 

 
 
 
 
 
 
 

 

 
 

 

 
 

 

 
 

 
 
Figure 6.2    M3T-PD32RM Initialize Dialog Box 
 

Setting MCU File 

To set 32176 Group, specify MCU file “32176.mcu”. 
This MCU file is stored in directory: (installed location) \ PD32RM \ MCUFILES.   
Click the MCU tab in the initialize dialog box (see Figure 6.2) and then the “Refer” button. This 
brings up a dialog box for setting MCU files. In this dialog box, select the MCU file. 

 

Setting Model 

While the MCU tab is open, select the appropriate MCU type from Model selection. 

 

Setting Mode 

While the MCU tab is open, select the appropriate MCU operation mode from Mode selection. 

 

Setting CPU Clock   

While the MCU tab is open, select the “40” for the appropriate CPU Clock.