PNY MBM630I7150 Manual De Usuario

- 10 -

 nVIDIA MCP73 Series                                                                                     Users Manual

    2.3.2 Installation of the CPU Cooler

        For proper installation, please kindly refer to the instruction manuals of your CPU Cooler.

    This mainboard provides two 240-pin DDRII (Double Data Rate) DIMM slots.     

    To install system memory:

    1. Power off the computer and unplug the 

        AC power cord before installing or 

        removing memory modules.

    2. Locate the DIMM slot on the board.

    3. Hold two edges of the DIMM module 

        carefully, keep away from touching its 

        connectors.

    4. Align the notch key on the module with 

        the rib on the slot.

    5. Firmly press the module into the slots until the ejector tabs at both sides of the slot     

        automatically snap into the mounting notch. Do not force the DIMM module in with extra

        force as the DIMM module only fits in one direction.

    6. To remove the DIMM modules, push the two ejector tabs on the slot outward     

        simultaneously, and then pull out the DIMM module.

Static electricity can damage the electronic components of the computer or optional     

boards. Before starting these procedures, ensure that you are discharged of static 

electricity by touching a grounded metal object briefly.