Renesas 32185 Manual De Usuario

32185/32186/32192/32195/32196 Group 

Starter Kit User’s Manual M3A-2154G52B 

REJ10B0223-0140/Rev.1.40 

Jan. 2007 

Page 14 of 79 

 

6.1.2 Starting 

M3T-PD32RM 

Before starting M3T-PD32RM, make sure the hardware components have been set up in 
accordance with the instructions in 5.1 M3A-2154 Evaluation Board Hardware Setup, and that 
the Starter Kit hardware system (M3A-2154 Evaluation Board and M32100T-EZ-E) have been 
powered on. Make sure that M3T-PD32RM cannot be started unless the power to the hardware 
system is turned on. 

 

To start M3T-PD32RM, choose   
  [Start] -> [Programs] -> [Renesas] -> [PD32RM V3.01 Release 00] -> [PD32RM]     
from Start menu of Windows. When M3T-PD32RM starts, the initialize dialog box shown in 
Figure 6.2 appears. So initialize M3T-PD32RM from this dialog box. 

 

 

 

 
 
 
 
 
 
 

 

 
 

 

 
 

 

 
 
Figure 6.2    M3T-PD32RM Initialize Dialog Box 
 

Setting MCU File 

Click the MCU tab in the initialize dialog box (see Figure 6.2) and then the “Refer” button. This 
brings  up  a  dialog  box  for  setting  MCU  files.  In  this  dialog  box,  select  the  MCU  file  described 
below. 

 
Table 6.1  MCU File 

MCU group name 

MCU file name 

32185 32185.mcu 
32186 32186.mcu 
32192 32192.mcu 
32195 32195.mcu 
32196 32196.mcu 

 

This MCU file is stored in directory: (installed location) \ PD32RM \ MCUFILES. 

 

Setting Model 

While the MCU tab is open, select the appropriate MCU type from Model selection. 

 

Setting Mode 

While the MCU tab is open, select the appropriate MCU operation mode from Mode selection.