Gigabyte 4500 Manual De Usuario

- 52 -

N400 Pro2 / N400 Series Motherboard

Disabled

Disable onboard Serial port 2.

3F8/IRQ4

Enable onboard Serial port 2 and address is 3F8, using IRQ4.

2F8/IRQ3

Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value)

3E8/IRQ4

Enable onboard Serial port 2 and address is 3E8, using IRQ4.

2E8/IRQ3

Enable onboard Serial port 2 and address is 2E8, using IRQ3.

Auto

BIOS will automatically setup the port 2 address.

This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.

Normal

Set onboard I/O chip UART to Normal Mode. (Default Value)

IrDA

Set onboard I/O chip UART to IrDA Mode.

ASKIR

Set onboard I/O chip UART to ASKIR Mode.

This feature allows you to seclect IR mode.

This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR".

Half

IR Function Duplex Half. (Default Value)

Full

IR Function Duplex Full.

This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378, using IRQ7. (Default Value)

278/IRQ5

Enable onboard LPT port and address is 278, using IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC, using IRQ7.

This feature allows you to connect with an advanced printer via the port mode it supports.

SPP

Using Parallel port as Standard Parallel Port.

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port. (Default Value)

ECP+EPP

Using Parallel port as ECP & EPP mode.