Dialogic M7324 Manual De Usuario

answer. Because of this capability, supervised transfer is a comparatively 
preferred call transfer method. 

There are three different ways to perform a transfer operation, namely: 

•  & transfer 

•  Display key press transfer 

•  Memory key press transfer 

Each method is described below. 

Once in a connected call, you can initiate a transfer with dx_dial(&,<ext>), 
where & acts as a key press of the transfer key (which is memory button 03) 
and <ext> is the PBX extension to which you are transferring the call. 

To complete a call (supervised or blind), the application must go on-hook. 

A transferred call can be aborted at any time (prior to completing the transfer) 
by pressing the appropriate appearance key where the original call resides. 
The application can perform this only in a supervised transfer mode. For 
example, if the original call resides on the first appearance key (Memory 
Button 01), dialing dx_dial(<ESC>K1) brings the original caller back to an 
active state. 

Once in a connected call, you can initiate a transfer with 
dx_dial(<ESC>KR,<ext>), where <ESC>KR acts as a key press of the far-