Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Port Information Settings

Function

Set the untagged VLAN.

Available Model

XG0224 / XG0448 / XG2600

Syntax

ether <number> vlan untag <untagged_vidlist>

Options

<number>
•

ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")

<untagged_vidlist>
•

Untagged VLAN ID list
Set an untagged VLAN ID.
When setting multiple IDs, separate them with commas (,).

Use Mode

Configuration mode (admin class)

Explanation

Set an untagged VLAN ID.

Caution

•

To add a VLAN, specify the VLAN ID list including already registered VLANs.

•

Although multiple vid numbers can be specified in the "untagged_vidlist", the following 
conditions must be satisfied.
- Only a single port can be defined as a port VLAN.

If multiple VLANs with no protocol VLAN settings have been specified, only the VLAN 
with the smallest number will be enabled.

- The protocol VLANs of up to 11 protocols (system definition protocol (ipv4/ipv6/fna) 

or user definition (up to 8 definitions)) can be defined.

The M1 port internally uses maximum VLAN ID in unused.
Therefore, the communication of the M1 port is temporarily interrupted when VLAN ID 
allocated in the M1 port is specified by the vlan untag command, and the TCP session is 
cut. (Only XG2600)

Default

On occasions when "ether vlan tag" command is not defined:
It is assumed that 1 has been specified as the default VLAN ID.

On occasions when 

 command is defined:

It is assumed that "ether vlan untag" command has not been specified. 

ether <number> vlan untag 1