Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Port Information Settings

Function

Set the target parameters for releasing the offline state on the Linkdown Relay function of 
the Ethernet port.

Available Model

XG0224 / XG0448 / XG2600

Syntax

ether <number> downrelay recovery cause <cause>

Options

<number>
•

The Ethernet port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")

<cause>

Specify the offline parameters targeted for releasing the offline state of linked port from 
the following.

•

downrelay
Specify when offline parameters with the Linkdown Relay function are targeted for 
release.

•

all
Release all the parameters offline states.

Use Mode

Configuration mode (admin class)

Explanation

Set the offline parameters targeted to releasing offline state lead by linkup when "auto" 
was specified on "ether downrelay recovery" command.
Set the parameters assigned for releasing of offline state during the releasing operation.

Caution

•

This command is enabled only when "auto" is specified in 

 command. The definition is ignored when "manual" is specified.

•

The offline state is released without depending on this command definition when the 

 command in the linked port is executed, or during dynamic definition change 

accompanied by releasing of the offline state.

Default

It is assumed that "downrelay" was specified for the target parameters of offline state 
release of the linked port list.

ether <number> downrelay recovery cause downrelay