Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Port Information Settings
142
- For ACL not to set TCP, UDP, or ICMP
1
You can expand the upper limit to use
resource distribution.
Note 4.
Up to 700 commands can be set for the entire device, including the definitions which refer
to ACL such as
to ACL such as
,
,
and "serverinfo filter" commands.
Note 5.
When the port type of the Ethernet port is a link aggregation, set it only to the anchor port
where the link aggregation is composed.
where the link aggregation is composed.
Default
It is assumed that this option has not been set.
5.1.6.2
ether qos aclmap move
Function
Change the QoS conversion priority of the Ethernet port.
Available Model
XG0224 / XG0448 / XG2600
Syntax
ether <number> qos aclmap move <count> <new_count>
Options
<number>
•
•
ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<count>
•
•
Source priority
Set the source priority with a decimal value.
Set the source priority with a decimal value.
<new_count>
•
•
Destination priority
Set the destination priority with a decimal value.
Set the destination priority with a decimal value.
Use Mode
Configuration mode (admin class)
Explanation
Change the priority of QoS definition for each Ethernet port.
If the current priority is set as <count>, change the priority of this definition to
<new_count>.
When the definition is changed, the priority is renumbered.
If the current priority is set as <count>, change the priority of this definition to
<new_count>.
When the definition is changed, the priority is renumbered.
Default
N/A due to an edit command.
Range
Model
0 to 511
XG0224 / XG0448
0 to 63
XG2600