Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Port Information Settings

This section explains about the commands related to LACP information.

Function

Set the LACP port priority.

Available Model

XG0224 / XG0448 / XG2600

Syntax

ether <number> lacp port-priority <priority>

Options

<number>
•

ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")

<priority>
•

Priority of LACP port
Set the port priority with a decimal value from 1 to 65535.
A smaller value has a higher priority.

Use Mode

Configuration mode (admin class)

Explanation

Set the priority of LACP port. The LACP port priority is used as the priority for the 
connection port to be selected by the link aggregation group. A smaller value has a 
higher priority. If the priority is the same, the port with a smaller number has the higher 
priority in port selection.
It indicates the priority of port selection in the local device. The final port selection for the 
final connection depends on the LACP system priority.
However, this definition is no use if the active or passive is not specified for the 
linkaggregation operation mode of "the linkaggregation mode".

Default

It is assumed that 32768 has been specified as the LACP port priority.

ether <number> lacp port-priority 32768