Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

VLAN Information Settings

5.3

VLAN Information Settings

This section explains about VLAN information settings.

The VLAN ID, which is to be specified in <vid> of [Options] described in each command of this section, shall be within 
the range specified as shown below. 

This section explains about the commands related to VLAN common information.

Function

Set the VLAN name.

Available Model

XG0224 / XG0448 / XG2600

Syntax

vlan <vid> name <name>

Options

<vid>
•

VLAN ID
Specify a VLAN ID with a decimal value.
VLAN1 has been defined as the default port VLAN during device startup, and it has 
been registered as the "default" VLAN name.

<name>
•

VLAN name
Specify the VLAN name using up to 32 characters from the 0x21, 0x23 to 0x7e ASCII 
set.

Use Mode

Configuration mode (admin class)

Explanation

Set a VLAN name.
If this command is omitted, VLAN1 is set to the "default".
If a VLAN other than VLAN1 is created, it is set in the 'v'+<vid> format.
(Example: If vid=5, "v5" is set.)

Caution

If "delete vlan <vid> name" is specified, the VLAN name is initialized but the VLAN itself 
is not deleted. (The VLAN can be deleted by the "ether vlan" command.)

Default

When VLAN ID is 1

When VLAN ID is other than 1

1 to 4094

XG0224 / XG0448 / XG2600

vlan 1 name default

vlan <vid> name 'v'+<vid>