Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

Function

Set the SNMP host information.

Available Model

XG0224 / XG0448 / XG2600

Syntax

snmp manager <manager_number> <address> <community> <trap> [<write>]

Options

•

SNMP host definition number
Specify a serial number of SNMP host definition with a decimal value from 0 to 7.

<address>
•

Access permission/trap sending address
Specify an IP address to permit access and to send a trap to, in the 
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
Specifying 0.0.0.0 will permit access by all hosts without trap sending.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254

<community>

Specify the community name.

•

Community name
Specify the community name for trap sending with up to 32 characters.

•

public
Specify it when communicating with any of the SNMP managers.

<trap>

Specify whether or not to perform trap transmission.

•

off
Specify it when not performing trap transmission.

•

v1
Specify it when performing SNMPv1 trap transmission.

•

v2c
Specify it when performing SNMPv2 trap transmission.

<write>

Specify whether or not to permit writing from the SNMP manager.

•

enable
Specify it when enabling writing from the SNMP manager.

•

disable
Specify it when disabling writing from the SNMP manager.

The default is "disable".

Use Mode

Configuration mode (admin class)

Explanation

Set the SNMP host information.

Default

It is assumed that no SNMP host information is set.