Fujitsu P3NK-4452-01ENZD Manual De Usuario

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

This section explains about the commands related to system log information.

Function

Set the server IP address that receives system log information.

Available Model

XG0224 / XG0448 / XG2600

Syntax

syslog server <number> address <address>

Options

<number>
•

Definition number
Specify the definition number of the server that receives system log information 
(message) with a decimal value from 0 to 2.

<address>
•

IP address
Specify the IP address of the server that receives system log information (message).
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254

Use Mode

Configuration mode (admin class)

Explanation

Set the server IP address that receives system log information (message).
The following describes the procedure for outputting system log information.

1)

Send information to a server the host with the IP address set in syslog server <address>.

2)

Display information with the 

 command.

Caution

If STP is used, it takes a long time for transmission to be enabled after device startup. 
During this time, some messages are discarded before reaching the server.
When transferring system logs to a Linux server, be sure to enable remote logging by 
using the "-syslogd -r" command or editing the syslog init file to include the "-r" qualifier.

Default

It is assumed that the server that receives system log information is not specified.