Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
298
Use Mode
Configuration mode (admin class)
Explanation
Set the system schedule.
Based on the schedule, the command is executed at the specified time.
Based on the schedule, the command is executed at the specified time.
Default
It is assumed that no schedule information is set.
5.15.6.2 schedule syslog
Function
Set the system log in the system schedule.
Available Model
XG0224 / XG0448 / XG2600
Syntax
schedule <number> syslog <syslog>
Options
<number>
Specify the schedule definition.
•
Schedule definition number
Specify a schedule definition number with a decimal value from 0 to 19.
Specify a schedule definition number with a decimal value from 0 to 19.
•
any
Define by using unused schedule definition number.
Define by using unused schedule definition number.
<syslog>
•
•
yes
Specify it when outputting command execution using the system log.
Specify it when outputting command execution using the system log.
•
no
Specify it when outputting command execution without using the system log.
Specify it when outputting command execution without using the system log.
Use Mode
Configuration mode (admin class)
Explanation
Specify whether or not to write a message, which was output by the command to be
activated in the schedule, to the system log.
This command is enabled only when the command activated in the schedule is specified.
activated in the schedule, to the system log.
This command is enabled only when the command activated in the schedule is specified.
Default
It is assumed that no data is output to system log at a command execution.
schedule <number> syslog no