Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Device Information Settings
326
5.15.8.44 serverinfo time filter
Function
Set the application filter for the TIME server function.
Available Model
XG0224 / XG0448 / XG2600
Syntax
serverinfo time filter <count> <action> acl <acl_count>
Options
<count>
•
•
Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
<action>
Specify an operation when filtering conditions are satisfied.
•
accept
Transmit the relevant packet.
Transmit the relevant packet.
•
reject
Block the relevant packet.
Block the relevant packet.
<acl_count>
•
•
ACL definition number
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be
disabled and ignored.
The following ACL definition is available for application filtering.
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be
disabled and ignored.
The following ACL definition is available for application filtering.
•
ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Use Mode
Configuration mode (admin class)
Explanation
Set the application filter for the TIME server function.
Default
It is assumed that the application filter is not set for the TIME server function.
5.15.8.45 serverinfo time filter move
Function
Change the priority of the application filter for the TIME server function.
Available Model
XG0224 / XG0448 / XG2600
Syntax
serverinfo time filter move <count> <new_count>
Options
<count>
•
•
Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
Specify a filtering definition number of which the priority is to be changed.
<new_count>
•
•
Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Use Mode
Configuration mode (admin class)
Explanation
Change the priority of the application filter for the TIME server function.