Fujitsu P3NK-4452-01ENZD Manual De Usuario
XG Series User's Guide
Chapter 5 Command Reference
Mode and Terminal Operation Commands
340
5.17.2.2 terminal window
Function
Set the terminal screen size.
Available Model
XG0224 / XG0448 / XG2600
Syntax
terminal window [column <column>] [line <line>]
Options
column <column>
Specify the number of digits of the terminal screen with a decimal value.
line <line>
Specify the number of lines of the terminal screen with a decimal value.
Use Mode
Operation mode (user class/admin class)
Configuration mode (admin class)
Configuration mode (admin class)
Explanation
Specify the screen size of the terminal.
For telnet or ssh connection, the screen size of the terminal reported from a telnet or ssh
client is used at connection or changing the screen size.
If the screen size is changed after reported, this setting value will be used.
For telnet or ssh connection, the screen size of the terminal reported from a telnet or ssh
client is used at connection or changing the screen size.
If the screen size is changed after reported, this setting value will be used.
Caution
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
class can be saved as the configuration by executing the
command. This
command in the configuration mode.
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
Specifying incorrect screen size may cause a display distortion when a command is input
or executed.
Specifying incorrect screen size may cause a display distortion when a command is input
or executed.
Default
It is assumed that the screen size of the terminal is set to 80 columns x 24 lines.
5.17.2.3 terminal charset
Function
Set the Japanese Kanji character codes.
Available Model
XG0224 / XG0448 / XG2600
Syntax
terminal charset {EUC|SJIS}
Options
EUC
Use the EUC Japanese Kanji character codes on the terminal.
SJIS
Use the Shift-JIS Japanese Kanji character codes on the terminal.
Use Mode
Operation mode (user class/admin class)
Configuration mode (admin class)
Configuration mode (admin class)
Explanation
Specify the Japanese Kanji character codes to be used on the terminal.
Caution
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
class can be saved as the configuration by executing the
command. This
command in the configuration mode.
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
Default
It is assumed that the EUC Japanese Kanji character codes are used on the terminal.
terminal window column 80 line 24
terminal charset EUC